DRILLSTAR CARBIDE TOOLS ARE WORKING IN MANY PLACES AROUND THE WORLD
CKJ6163 series is horizontal lathe used for machining various kinds of steel parts. It is especially suitable for mass production of machining inside and outside cylinder surface, end surface, metric and inch thread etc. It can also perform the function of drilling and boring hole. Main features: 1. Dynamic sliding bearing is adopted on spindle nose. The bearings have better precision and obtained state patent. 2. The spindle has two speed grade. The speed rang of spindle is 30-1000 r/min. Large spindle bore (Ф120 mm). 3. It is adopted high power low noise servo motor and precision ball screw on X, Z axis, so the machine has high positioning accuracy, good stability and high reliability. 4. The machine is equipped four-position automatic rotary turret with intermittent automatic lubrication which the user can adjust according to the condition. It fully guarantee the rail surface lubrication and improve the accuracy of machine effectively. 5. The machine has double door and semi protective structure, so it has beautiful shape and easy to operate.
Main Specifications and Features
Technical parameter | model | ||
CKJ6163 | |||
Work capacity | Max. swing diameter over bed | Ф630 mm | |
Max. swing diameter over cross slide | Ф390 mm | ||
Width of bed | 410 mm | ||
Two center distance | 1000，1500，2000 mm | ||
spindle | Range of spindle speed | 30-1000 r/min 2， | |
Spindle bore diameter | Ф120 | ||
Spindle nose | D-11 | ||
Taper of spindle bore | metric Ф130 | ||
feed | Min. set unit of longtudinal | 0.01 mm | |
Min. set unit of transverse | 0.005 mm | ||
Rapid moving speed of X-axis | 3000 mm/min | ||
Rapid moving speed of Z-axis | 6000 mm/min | ||
Tool post | Cross section of tool | 28×32mm | |
Max. travel of bottom slide | 280 mm | ||
No. of tool | 4 | ||
Control mode of tool | manual, automatic | ||
tailstock | Taper of tailstock sleeve | Morse No.5 | |
Diameter of tailstock sleeve | Ф100 mm | ||
Travel of tailstock sleeve | 250 mm | ||
motor | Main motor power | 11kW Servo motor made in china | |
Coolant pump power | 0.09 kW | ||
CKJ6163 series is horizontal lathe used for machining various kinds of steel parts. It is especially suitable for mass production of machining inside and outside cylinder surface, end surface, metric and inch thread etc. It can also perform the function of drilling and boring hole. Main features: 1. Dynamic sliding bearing is adopted on spindle nose. The bearings have better precision and obtained state patent. 2. The spindle has two speed grade. The speed rang of spindle is 30-1000 r/min. Large spindle bore (Ф120 mm). 3. It is adopted high power low noise servo motor and precision ball screw on X, Z axis, so the machine has high positioning accuracy, good stability and high reliability. 4. The machine is equipped four-position automatic rotary turret with intermittent automatic lubrication which the user can adjust according to the condition. It fully guarantee the rail surface lubrication and improve the accuracy of machine effectively. 5. The machine has double door and semi protective structure, so it has beautiful shape and easy to operate.
Main Specifications and Features
Technical parameter | model | ||
CKJ6163 | |||
Work capacity | Max. swing diameter over bed | Ф630 mm | |
Max. swing diameter over cross slide | Ф390 mm | ||
Width of bed | 410 mm | ||
Two center distance | 1000，1500，2000 mm | ||
spindle | Range of spindle speed | 30-1000 r/min 2， | |
Spindle bore diameter | Ф120 | ||
Spindle nose | D-11 | ||
Taper of spindle bore | metric Ф130 | ||
feed | Min. set unit of longtudinal | 0.01 mm | |
Min. set unit of transverse | 0.005 mm | ||
Rapid moving speed of X-axis | 3000 mm/min | ||
Rapid moving speed of Z-axis | 6000 mm/min | ||
Tool post | Cross section of tool | 28×32mm | |
Max. travel of bottom slide | 280 mm | ||
No. of tool | 4 | ||
Control mode of tool | manual, automatic | ||
tailstock | Taper of tailstock sleeve | Morse No.5 | |
Diameter of tailstock sleeve | Ф100 mm | ||
Travel of tailstock sleeve | 250 mm | ||
motor | Main motor power | 11kW Servo motor made in china | |
Coolant pump power | 0.09 kW | ||
